Specs and Characteristics/ General Characteristics and Specifications   X-Scan 0.2f2 X-Scan 0.4f2 X-Scan f2 0.4f2-xxx-f X-Scan f2 0.4f2-xxx-HE X-Scan 0.8f2 X-Scan f2 0.8f2-xxx-HE X-ray tube kVp range 20-160 kVp 20-160 kVp 20-160 kVp 100-450kVp 20-160 kVp 100-450 kVp Scintillator GOS GOS GOS CdWO4 GOS CdWO4 Active area lengths 102-410 mm 102-819 mm 102-205 mm 102-819 mm 205-1638 mm 205-1638 mm Number of pixels 512-2048 256-2048 256-512 256-2048 256-2048 256-2048 Pixel Pitch 0.2 mm 0.4 mm 0.4 mm 0.4 mm 0.8 mm 0.8 mm Pixel Height 0.3 mm 0.6 mm 0.6 mm 0.6 mm 0.8 mm 0.8 mm Pixel Width 0.1 mm 0.3 mm 0.3 mm 0.3 mm 0.7 mm 0.6 mm Max. Scanning Speed 20 cm/s 1) 60 cm/s 1) 133 cm/s 60 cm/s 1) 200 cm/s 1) 200 cm/s 1) Min. Integration Time 1 ms 0.67 ms 0.3 ms 0.67 ms 0.4 ms 0.4 ms Max Integration Time 10 ms 10 ms 10 ms 10 ms 10 ms 10 ms A/D Resolution 14-bits 14-bits 14-bits 14-bits 14-bits 14-bits Dynamic Range > 2000 2) > 2000 2) > 2000 2) > 2000 2) > 2000 2) > 2000 2) Data Digital Interface 16-bits 3) 16-bits 3) 16-bits 3) 16-bits 3) 16-bits 3) 16-bits 3) Operational voltage +12 V DC 4) +12 V DC 4) +12 V DC 4) +12 V DC 4) +12 V DC 4) +12 V DC 4) Power consumption 60 W max 60 W max 60 W max 60 W max 60 W max 60 W max Frame grabber interface RS-422 RS-422 RS-422 RS-422 RS-422 RS-422 Control interface RS-232 RS-232 RS-232 RS-232 RS-232 RS-232 Note 1) Note 2) Note 3) Note 4) Maximum speed is specified for active length up to 512 mm. Dynamic Range is defined as saturation signal/RMS noise, normal detector sensitivity. Digital interface has 16 RS-422 I/O lines for data, but user can select actual data to be 14,12,10 or 8 bits. The default value is 12-bits The operational voltage to be supplied to module. External power supply for 100-240 AC is provided as option.   home | hardware | software | applications and images | specs and characteristics | build your own x-scan legal notice © Detection Technology Inc. 2004